TECH2支持1992年和更新款的通用型汽車。每個通用子品牌所使用的診斷軟件都是單獨提供的。通用是GM和世界上有與其相關經銷權汽車的掃描工具（比如：鈴木，五十鈴，HOLDENS，薩博，AM通用以及歐寶和沃克斯豪爾）。
性能：
•可靠的GM軟件，為所有GM汽車提供最完整的診斷軟件。
•支持所有1992年后GM系統的OBD協議。
•能捕捉到存貯的診斷故障編碼（DTCs）和凍結幀的數據。
•在汽車運行時可以查看其診斷狀態。
•在執行動力系，底盤和車身診斷時，有完整的雙向控制功能。
•對1993年和更新款GM汽車閃存編程的ECU具有強大的編程功能。
•便利的背光式屏幕。
參數規格：
•尺寸：12" x 6" x 2"
•微處理器：32 bit, 16 MHz
•內存：32 MB flash type II PCMCIA.為未來的擴展提供TYPE III插槽。
•通訊：內置RS232通訊端口。
•屏幕：3.8" x 2.8"有著完整圖像容量的背光式單色畫：320 x 240像素？梢约纯田@示高達9輛車的參數。
TECH2有三個主要軟件功能:
*診斷
1、動力系
2、底盤
3、車身
*編程服務（ECU再編程）
1、對存在的ECU再編程
2、替換并編程新ECU
*查看采集到的數據
1、凍結幀
2、失敗的記錄
包裝：
* TECH 2
* 16 Pin適配器
* NAO 12/19適配器
* 12V Cigarrette電源線
* 110V AC/DC電源
* DLC回路線
* RS232 DB9適配器
* RS232線
* RS232回路
*機箱
The TECH-2 is the same tester GM Technicians use to diagnose GM vehicles. The Vetronix TECH2 comes with Authentic GM software and provides support for on-board diagnostics on all GM systems 1992 thru 2008
Features:
Authentic GM software in the TECH 2 Flash means the most comprehensive diagnostic software available for late model GM vehicles.
Support for on-board diagnostics on all GM systems 1992 thru current year.
Removable hardware modules provide insurance against scan toolobsolescence.
Large, easy-to-read backlit screen.
RS232 & RS485 ports provide the avenue to connect future devices to your Tech 2 Flash.
Ability to capture stored DTCs, Freeze Frame, and Failure Record for later review.
Ability to view the status of vehicle diagnostic tests as they run.
Bi-directional
The authentic GM 1992-current year software will provide full bi-directional control when performing power train, chassis, and body diagnostics.
Vetronix TECH-2 Specifications
Dimensions
12" X 6" X 2"
Microprocessor
32 bit, 16 MHz
Memory
32 MB flash type II PCMCIA. Type III slot available for future expansion.
Communications
Integral RS232 communication port.
Screen
3.8" X 2.8" backlit monochrome with full graphics capability: 320 X 240 pixels. Displays up to 9 vehicle parameters at once
GM TECH-2 Starter Kit with Candi Module & TIS Kit includes (All ORIGINAL and NEW!):
TECH-2 Flash Tester
32 MB PCMCIA Card with GM OE Applications
CAN diagnostic interface module(CANdi) and instruction sheet download ( 199.2 kb )
GM aftermarket Expertec TIS software on DVD-ROM disks
TIS2000 dongle to access SPS/Security features
Data/Sensor/Trouble Code Manual
DLC Cable, DLC Loopback Adapter
12V Cigarette Lighter Power Cable
SAE 16/19 Adapter
NAO 12/19 Adapter
Battery Power Cable
Storage Case
An industry change in protocol from OBD II to Controller Area Network (CAN) has begun. In order to perform diagnostics on a vehicle that uses the CAN interface; you will need the TECH2 Flash and a CAN diagnostic interface module. The module connects between the TECH2 Flash's diagnostic link cable and the OBD adapter. Once the module is connected, it can be used on all GM vehicle applications, even those vehicles using other platforms such as OBD I and OBD II.
